JOURNALS
|
2019. A Detailed Analysis of the
Centrifugal Pumping Phenomenon in HAWTs Through the Use of CFD Models.
DOI:10.1007/978-3-030-13531-7_8. pp.129-149. ISBN:978-3-030-13530-0. In
RESEARCH TOPICS IN WIND ENERGY - SPRINGER INTERNATIONAL
PUBLISHING - ISSN:2196-7806 vol. 8 (in collaborazione
con
Mauro, Stefano; Lanzafame, Rosario; Brusca, Sebastian)
View at Publisher
|
|
2019. Unsteady computational
fluid dynamics analysis of the hydrodynamic instabilities in a reversible
Francis turbine used in a storage plant (2019) – HELIYON - Elsevier Science ISSN:
2405-8440 - Sept 2019 - Volume 5, Issue 9, pages 1 – 15, doi: 10.1016/j.heliyon.2019.e02441 (in collaborazione con S. Brusca, R. Lanzafame, S. Mauro)
View
at Publisher
|
|
2019. CFD modeling of a ducted Savonius wind turbine for the evaluation of the
blockage effects on rotor performance. DOI:10.1016/j.renene.2019.03.125.
pp.28-39. In RENEWABLE ENERGY - ELSEVIER SCIENCE -
ISSN:0960-1481 vol. 141 (in collaborazione con Mauro, S.; Brusca, S.;
Lanzafame, R..)
View
at Publisher
|
|
2019. Fuels with low octane
number: water injection as knock control method – HELIYON - ELSEVIER
SCIENCE ISSN: 2405-8440 - 21 Feb 2019 - Volume 5, Issue 2, pages 1 –
13, doi:10.1016/j.heliyon.2019.e01259 (in collaborazione con S. Brusca, A. Galvagno, R.
Lanzafame, S. Mauro)
View at Publisher
|
|
2018. Second generation
bioethanol production from Arundo donax biomass: An optimization method - ENERGY
PROCEDIA- ELSEVIER SCIENCE ISSN: 1876-6102 – Volume 148, August 2018, Pages
728-735 DOI 10.1016/j.egypro.2018.08.141 – (in collaborazione
con S. Brusca, S. L. Cosentino, F. Famoso, R. Lanzafame, S. Mauro e P.F. Scandura)
View at Publisher
|
|
2018. On the Wind Turbine Wake
Mathematical Modelling - ENERGY PROCEDIA- ELSEVIER SCIENCE ISSN:
1876-6102 – Volume 148, August 2018, Pages 202-209 – DOI
10.1016/j.egypro.2018.08.069 - (in collaborazione
con S. Brusca, R. Lanzafame, F. Famoso, A.
Galvagno, S. Mauro e M. Prestipino)
View at Publisher
|
|
2018. Internal Combustion Engine
Heat Release Calculation using Single-Zone and CFD 3D Numerical Models - INTERNATIONAL
JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING SPRINGER VERLAG - Print
ISSN 2008-9163 - Online ISSN 2251-6832 –
2018 February – DOI: 10.1007/s40095-018-0265-9 (in collaborazione con R. Şener,
M. Z. Gül, R. Lanzafame, S. Brusca, S. Mauro)
View at Publisher
|
|
2017. Wind Turbine Wake
Mathematical Models Validation by Means of Wind Field Data - INTERNATIONAL
JOURNAL OF APPLIED ENGINEERING RESEARCH ISSN 0973-4562 Vol 12 (24) pp. 16068-16076
(in collaborazione con Brusca S., Famoso F., Galvagno A., Mauro S., Lanzafame R.)
View at Publisher
|
|
2017. A Site Selection Model to
Identify Optimal Locations for Microalgae Biofuel Production Facilities in
Sicily (Italy) - INTERNATIONAL JOURNAL OF APPLIED ENGINEERING RESEARCH
ISSN 0973-4562 Vol 12 (24) pp. 16058-16067 (in collaborazione
con Brusca S., Famoso F., Lanzafame R., Wilson
J.)
View at Publisher
|
|
2017. Back-forward Model
Analysis for Spatial Localization of Pollutant Sources - INTERNATIONAL
JOURNAL OF APPLIED ENGINEERING RESEARCH ISSN 0973-4562 Vol 12 (24) pp.
16047-16057 (in collaborazione con Brusca S., Famoso F., Mauro S., Lanzafame R.)
View at Publisher
|
|
2017. Dispersione
degli inquinanti atmosferici: analisi, modelli matematici e valutazione
dell’impatto ambientale (2017) – La Termotecnica Collana: 2017, Giugno 2017,
numero 05 (in collaborazione con Brusca S., Famoso S., Lanzafame R. e Mauro
S.)
|
|
2017. Small-Scale Open-Circuit Wind
Tunnel: Design Criteria, Construction and Calibration (2017) - INTERNATIONAL
JOURNAL OF APPLIED ENGINEERING RESEARCH ISSN 0973-4562 Vol. 12 (23) pp.
13649-13662 (in collaborazione con Mauro S.,
Brusca S., Famoso F., Galvagno A., Lanzafame R.)
View at Publisher
|
|
2017. An Insight into the Rotational Augmentation
on HAWTs by means of CFD Simulations–Part II: Post-Processing and
Force Analysis (2017) - INTERNATIONAL JOURNAL OF APPLIED ENGINEERING
RESEARCH ISSN 0973-4562 Vol. 12 (21), 10505-10529 (in collaborazione con S. Mauro e R. Lanzafame)
View at Publisher
|
|
2017. An Insight into the
Rotational Augmentation on HAWTs by means of CFD Simulations–Part I:
State of the Art and Numerical Results (2017) -INTERNATIONAL JOURNAL OF
APPLIED ENGINEERING RESEARCH ISSN 0973-4562 Vol. 12 (21), 10491-10504
(in collaborazione con S. Mauro e R. Lanzafame)
View at Publisher
|
|
2017. LANZAFAME R., MAURO S.,
MESSINA M. , PIRRELLO D. Transition turbulence
model calibration for wind turbine airfoil characterization through the use
of a Micro-Genetic Algorithm (2017) -
INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL ENGINEERING - SPRINGER – ISSN: 2008-9163 (Print) 2251-6832 (Online) - https://doi.org/10.1007/s40095-017-0248-2.
View at Publisher
|
|
2017. On the turbine-induced
damping in Oscillating Water Column wave energy converter. DOI:10.1016/j.egypro.2017.08.215. pp.581-588. In ENERGY
PROCEDIA - ISSN:1876-6102 vol. 126
Brusca, Sebastian;
Galvagno, Antonio; Lanzafame, Rosario; Cugno Garrano, Adriana Marino;
Mauro, Stefano
View at Publisher
|
|
2017. Placement optimization of
biodiesel production plant by means of centroid mathematical method. DOI:10.1016/j.egypro.2017.08.241.
pp.353-360. In ENERGY PROCEDIA - ISSN:1876-6102 vol. 126
Brusca, Sebastian;
Famoso, Fabio; Lanzafame, Rosario; Messina, Michele; Monforte, Pietro
View at
Publisher
|
|
2017. Heat Exchange Numerical
Modeling of a Submarine Pipeline for Crude Oil Transport. DOI:10.1016/j.egypro.2017.08.048.
pp.18-25. In ENERGY PROCEDIA - ISSN:1876-6102 vol. 126
Lanzafame, R.;
Mauro, S.; Messina, M.; Brusca, S.
View at Publisher
|
|
2016. PM10 Dispersion Modeling
by Means of CFD 3D and Eulerian-Lagrangian Models: Analysis and Comparison
with Experiments. DOI:10.1016/j.egypro.2016.11.042.
pp.329-336. In ENERGY PROCEDIA - ISSN:1876-6102 vol. 101
Brusca S.; Famoso
F.; Lanzafame R; Mauro S; Messina M; Strano S.
View at Publisher
|
|
LANZAFAME R., MAURO S., MESSINA M. Numerical and
experimental analysis of micro HAWTs designed for wind tunnel applications
(2016) - INTERNATIONAL JOURNAL OF
ENERGY AND ENVIRONMENTAL ENGINEERING
- SPRINGER – ISSN: 2008-9163
(Print) 2251-6832 (Online) - DOI: 10.1007/s40095-016-0202-8.
View at Publisher
|
|
LANZAFAME R., MAURO S., MESSINA M.
Evaluation of the radial flow effects on micro HAWTs through the use of a
transition CFD 3D model - Part II: Post-processing and comparison of the
results (2015) - ENERGY PROCEDIA Elsevier Science ISSN:
1876-6102. Vol. 82 pp. 164 – 171.
View at Publisher
|
|
LANZAFAME R., MAURO S., MESSINA
M. Evaluation of the radial flow effects on micro HAWTs through the use of
a transition CFD 3D model - Part I: State of the art and Numerical model
review. (2015) - ENERGY PROCEDIA
Elsevier Science ISSN: 1876-6102. Vol. 82 pp. 156 – 163.
View at Publisher
|
|
BRUSCA S., LANZAFAME R., MESSINA
M., PIRRELLO D. A New Tool to Optimize ICE Performance and Emissions Via 1D
Code Coupled with GAs. (2015) - ENERGY
PROCEDIA Elsevier Science ISSN:
1876-6102. Vol. 82 pp. 111 – 118.
View at Publisher
|
|
BRUSCA S., LANZAFAME R., MARINO
A., MESSINA M. Effects of Pressure, Temperature and Dilution on Fuels/Air
Mixture Laminar Flame Burning Velocity (2015) - ENERGY PROCEDIA Elsevier Science ISSN:
1876-6102. Vol. 82 pp. 125 – 132.
View at Publisher
|
|
BRUSCA S., CUCINOTTA F., GALVAGNO
A., LANZAFAME R., MARINO A., MAURO S., MESSINA M. Oscillating water column
wave energy converter by means of straight-bladed Darrieus turbine (2015) -
ENERGY PROCEDIA Elsevier
Science ISSN: 1876-6102. Vol. 82 pp. 766 – 773.
View at
Publisher
|
|
LANZAFAME R., MAURO S. , MESSINA M. HAWT Design and Performance Evaluation:
Improving the BEM Theory Mathematical Models (2015) - ENERGY PROCEDIA Elsevier Science ISSN: 1876-6102. Vol. 82
pp. 172 – 179.
View at Publisher
|
|
BRUSCA S., LANZAFAME R., MARINO
A., MESSINA M. Performance Analysis of Biofuel Fed Gas Turbine (2015) - ENERGY
PROCEDIA Elsevier
Science ISSN: 1876-6102. Vol. 81 pp. 493 – 504.
View at
Publisher
|
|
BRUSCA S., LANZAFAME R., MARINO
A., MESSINA M. Laminar Flame Burning Velocity of Fuels/Air Mixture at
Different Pressure, Temperature and Equivalence Ratio - International
Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 22
(2015) pp 42851-42857.
View at
Publisher
|
|
BRUSCA S., LANZAFAME R., MARINO
A., MESSINA M. Dynamic Analysis of Combustion Turbine Running on Synthesis
Gas (2015) - International Journal of Applied Engineering Research ISSN
0973-4562 Volume 10, Number 21 - pp 42244-42253.
View at
Publisher
|
|
BRUSCA S., LANZAFAME R., MESSINA
M. Design and Performance of a Straight-Bladed Darrieus Wind Turbine. INTERNATIONAL
JOURNAL OF APPLIED ENGINEERING RESEARCH, Vol. 10 (16), 2015, pp. 37431-37438.
Print ISSN 0973-4562; Online ISSN 1087-1090.
View at
Publisher
|
|
BRUSCA S., LANZAFAME R., MESSINA
M. Wind Turbine Placement Optimization by Means of the MONTE Carlo
Simulation Method – MODELLING AND SIMULATION IN ENGINEERING.–
Hindawi Publishing Corporation (2014).
View at Publisher
|
|
BRUSCA S., LANZAFAME R., MESSINA
M. Flow Similitude Laws Applied to Wind Turbines Through Blade Element
Momentum Theory Numerical Codes – INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL
ENGINEERING Springer Volume 5, Issue 4 (2014), Page 313-322
DOI: 10.1007/s40095-014-0128-y ISSN:
2008-9163.
View at Publisher
|
|
BRUSCA S., LANZAFAME R., MESSINA
M. Design of a Vertical Axis Wind Turbine: How The Aspect Ratio Affects the
Turbine’s Performance – INTERNATIONAL JOURNAL OF ENERGY AND ENVIRONMENTAL
ENGINEERING – Springer Volume 5, Issue 4 (2014), Page 333-340, DOI:
10.1007/s40095-014-0129-x
ISSN: 2008-9163.
View at Publisher
|
|
LANZAFAME R., MAURO S., MESSINA
M. 2D CFD Modeling of H-Darrieus Wind Turbines using a Transition
Turbulence Model – ENERGY PROCEDIA Elsevier Science ISSN:
1876-6102. Vol. 45, 131-140 (2014).
View at Publisher
|
|
LANZAFAME R., MAURO S., MESSINA
M. Wind turbine CFD Modeling using a correlation based transitional model RENEWABLE ENERGY Volume 52,
April 2013, pp. 31-39. DOI 10.1016/j.renene.2012.10.007. (2013).
View at Publisher
|
|
LANZAFAME R., MESSINA M.
Advanced Brake State Model and Aerodynamic Post-Stall Model For Horizontal
Axis Wind Turbines. RENEWABLE
ENERGY, vol. 50, p. 415-420, ISSN: 0960-1481, doi:
10.1016/j.renene.2012.06.062. (2013).
View at Publisher
|
|
MESSINA M. Experimental
Validation of Pressure Loss in Anemometer Testing Equipment. RENEWABLE & SUSTAINABLE ENERGY
REVIEWS, vol. 16, p. 2980-2987, ISSN: 1364-0321, doi:
10.1016/j.rser.2012.02.025. (2012).
View at Publisher
|
|
LANZAFAME R., MESSINA M. BEM
Theory: How To Take In To Account The Radial Flow
Inside of a 1-D Numerical Code. RENEWABLE
ENERGY, vol. 39, p. 440-446, ISSN: 0960-1481, doi: 10.1016/j.renene.2011.08.008.
(2012).
View at Publisher
|
|
LANZAFAME R., MESSINA M.
Horizontal Axis Wind Turbine Working at Maximum Power Coefficient
Continuously. RENEWABLE ENERGY,
vol. 35, p. 301-306, ISSN: 0960-1481, doi: 10.1016/j.renene.2009.06.020.
(2010).
View at Publisher
|
|
LANZAFAME R., MESSINA MPower
Curve Control in Micro Wind Turbine Design. ENERGY Journal –
Elsevier Science – Vol. 35 (No. 2) February 2010 – pp. 556-561.
ISSN 0360-5442. DOI: 10.1016/j.energy.2009.10.025. . (2010).
View at Publisher
|
|
LANZAFAME R., MESSINA M. Design
and Performance of a Double-Pitch Wind Turbine with Non-Twisted Blades. RENEWABLE ENERGY, vol. 34,
p. 1413-1420, ISSN: 0960-1481. (2009).
View at Publisher
|
|
LANZAFAME R., MESSINA M. Optimal
Wind Turbine Design to Maximize Energy Production. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART A,
JOURNAL OF POWER AND ENERGY, vol. 2, p. 93-101, ISSN: 0957-6509,
doi: 10.1243/09576509JPE679. (2009).
View at Publisher
|
|
LANZAFAME R., MESSINA M. Fluid Dynamics
Wind Turbine Design: Critical Analysis, Optimization and Application of BEM
Theory. RENEWABLE ENERGY,
vol. 32, p. 2291-2305, ISSN: 0960-1481. (2007).
View at Publisher
|
|
LANZAFAME R., MESSINA M.
Thermodynamic Property Models for Unburned Mixtures and Combustion Gases. INTERNATIONAL JOURNAL OF
THERMODYNAMICS, vol. 9, p. 73-80, ISSN: 1301-9724. (2006).
View at Publisher
|
|
LANZAFAME R., MESSINA M. New Gases
Thermodynamic Properties Models for ICE Combustion Phenomena Prediction. INGEGNERIA DELL'AUTOVEICOLO, vol. 58 n.3/4
Marzo/Aprile, p. 45-51. (2005).
View at
Publisher
|
|
LANZAFAME R.,
MESSINA M. L’influenza dei parametri termodinamici sul rilascio termico nei
MCI. LA TERMOTECNICA, vol.
Novembre, p. 71-77, ISSN: 0040-3725. (2004).
|
|
LANZAFAME R., MESSINA M. ICE
Gross Heat Release Strongly Influenced by Specific Heat Ratio Values. INTERNATIONAL JOURNAL OF AUTOMOTIVE
TECHNOLOGY, vol. 4, p. 125-133, ISSN: 1229-9138. (2003).
View at Publisher
|
|
LA ROSA G., MESSINA M., MUSCATO
G., SINATRA R. A low-cost lightweight climbing robot for the inspection of
vertical surfaces. MECHATRONICS,
vol. 12, p. 71-96, ISSN: 0957-4158. (2002).
View at Publisher
|
|
LA ROSA G., MESSINA M., RISITANO
A. Stiffness of Variable Thickness Belleville Springs. TRANSACTION of ASME: JOURNAL OF MECHANICAL DESIGN, vol. 123, p. 294-299, ISSN:
1050-0472. (2001).
View at Publisher
|
|
LANZAFAME R.,
MESSINA M. Un nuovo polinomio interpolatore per il calcolo dell’entalpia
dei gas. LA TERMOTECNICA, vol.
Novembre, p. 87-93, ISSN: 0040-3725. (2000).
|
BOOKS
|
BRUSCA S., LANZAFAME R., MESSINA
M. LOW-SPEED WIND TUNNEL: DESIGN AND BUILD. In: Wind Tunnels: Aerodynamics,
Models and Experiments. p. 189-220, NEW YORK: Nova Science Publishers, Inc.,
ISBN: 978-1-61209-204-1. (2011).
View at Publisher
|
CONFERENCES
BRUSCA
S., LANZAFAME R., MESSINA M., GALVAGNO A., CUCINOTTA F., MAURO S. (2015). Oscillating water column wave energy converter by means of
straight-bladed Darrieus turbine. 70th Conference of the Italian Thermal
Machines Engineering Association, ATI2015.
BRUSCA S., LANZAFAME R., MARINO CUGNO GARRANO
A., MESSINA M. (2015). Effects of Pressure,
Temperature and Dilution on Fuels/Air Mixture Laminar Flame Burning Velocity.
70th Conference of the Italian Thermal Machines Engineering Association,
ATI2015.
PIRRELLO
D., LANZAFAME R., MESSINA M., BRUSCA S. (2015) A New Tool to Optimize ICE
Performance and Emissions Via 1D Code Coupled with Gas. 70th Conference of
the Italian Thermal Machines Engineering Association, ATI2015.
LANZAFAME R, MAURO S, MESSINA M (2015). HAWT Design and Performance Evaluation: Improving the BEM Theory Mathematical
Models. 70th Conference of the Italian Thermal Machines Engineering
Association, ATI2015
LANZAFAME
R, MAURO S, MESSINA M (2015). Evaluation of the
radial flow effects on micro HAWTs through the use of a transition CFD 3D
model. 70th Conference of the Italian Thermal Machines Engineering
Association, ATI2015
BRUSCA
S., GALVAGNO A., LANZAFAME R., MARINO CUGNO GARRANO A., MESSINA M. (2014)
Performance Analysis of Biofuel Fed Gas Turbine - 69th Conference of the
Italian Thermal Machines Engineering Association, ATI2014
BRUSCA
S., LANZAFAME R., MARINO CUGNO GARRANO A., MESSINA M. (2013) On the
possibility to run an internal combustion engine on acetylene and alcohol.
68° Congresso Nazionale ATI
LANZAFAME
R, MAURO S, MESSINA M (2013). 2D CFD Modeling of H-Darrieus Wind Turbines
using a Transition Turbulence Model. 68° Congresso Nazionale ATI.
LANZAFAME R, MAURO S, MESSINA M (2011).
Criteri di progettazione di turbine eoliche attraverso codici fluidodinamici
3D. In: 66° Congresso Nazionale ATI.
MESSINA M (2011). Ottimizzazione della BEM
Theory per la progettazione fluidodinamica di turbine eoliche. In: 66°
Congresso Nazionale ATI .
BRUSCA
S, GALVAGNO A, LANZAFAME R, MESSINA M (2010). Hybrid
Vehicles Performances Analysis: Feed-Forward Dynamic Approach. In: SAE Paper
n. 2010-01-1443. Rio De Janeiro, Brazil, May 2010, p. 1-17, WARRENDALE, PA:
SAE INTERNATIONAL CONFERENCE
View at Publisher
FIORENZA
S, LANZAFAME R, MESSINA M (2008). Analysis of Rules-Based
Control Strategies for Integrated Starter Alternator Vehicles. In: SAE World
Congress & Exhibition. Detroit, MI, USA, April 14-17, 2008, vol. SAE
Paper n. 2008-01-1314
View at Publisher
R. LANZAFAME, MESSINA M (2007). A New
Approach to Newton-Raphson Method to Evaluate Thermodynamics Properties for a
“In-Equilibrium" Combustion Mixture. In: SAE 2007 FUELS & EMISSIONS
CONFERENCE. Cape Town, South Africa, January 23-25, 2007, vol. SAE Paper n. 2007-01-0024,
p. 1-9
View at Publisher
BRUSCA
S, A. GIUFFRIDA, R. LANZAFAME, MESSINA M (2007). Airfoils Characterization by
means of CFD Simulations in GRID Environment. In: Grid Open Days at the
University of Palermo. Palermo (Italy), 6-7 December 2007
FIORENZA
S, LANZAFAME R, MESSINA M (2007). Development of
a Quasi-Static Backward Code for the Simulation of an Integrated Starter
Alternator Vehicle. In: SAE 2007 Powertrain & Fluid Systems Conference
& Exhibition. Donald E. Stephens Convention Center Rosemont (Chicago),
Illinois, USA., October 29 - 31, 2007, vol. SAE Paper n. 2007-01-4125
View at Publisher
S. BRUSCA, R. LANZAFAME, MESSINA M (2006).
The Evaluation of Gross Heat Release in Internal Combustion Engines by Means
of Genetic Algorithms. In: SAE World Congress. vol. SAE Paper Numb.
2006-01-0657, p. 1-7
View at Publisher
S.
BRUSCA, S. COLLURA, R. LANZAFAME, MESSINA M (2006). The
Influence of Specific Heats Variability on Heat Release Analysis Using
Two-Zone Models. In: ASME International Engineering Congress and Exposition.
Chicago, Illinois, USA, November 2006, vol. ASME paper IMECE 2006-13456, p.
1-10
View at Publisher
S. BRUSCA, R. LANZAFAME, MESSINA M
(2005). A Combustion Model for ICE by Means Neural Network. In: 2005 SAE
Fuels & Lubricants Conference. Rio de Janeiro, Brazil, May 11 - 13 ,
2005, vol. SAE Paper Numb. 2005-01-2110, p. 1-7
View at Publisher
S. BRUSCA, R. LANZAFAME, MESSINA M
(2005). Equilibrium Thermodynamics of Combustion by Means of Genetic
Algorithms. In: ICEF2005 ASME Internal Combustion Engine Division 2005 Fall
Technical Conference. Ottawa, Canada, September 11-14, 2005, vol. ASME Paper
n. ICEF2005-1222, p. 1-7
View at Publisher
S.
BRUSCA, R. LANZAFAME, MESSINA M (2005). Neural
Network Application to Evaluate Thermodynamic Properties of ICE’s Combustion Gases.
In: SAE Book Numb. SP-1969, Title: Modeling of SI and Diesel Engines. vol.
SAE Paper Numb. 2005-01-1128, p. 1-6
View at Publisher
R. LANZAFAME, MESSINA M (2005). New
Gases Thermodynamic Properties Models to Predict Combustion Phenomena. In:
2005 SAE Fuels & Lubricants Conference. Rio de Janeiro, Brazil, May 11 -
13 , 2005, vol. SAE Paper Numb. 2005-01-2112, p. 1-8
View at Publisher
S. BRUSCA, R. LANZAFAME, MESSINA M
(2005). The Effects of Thermochemical Dissociation in ICE Heat Release
Evaluation. In: ICES2005 ASME Internal Combustion Engine Division 2005 Spring
Technical Conference. Chicago, IL, USA, April 5-7, 2005, vol. ASME Paper
Numb. ICES2005-1004, p. 1-6
View at Publisher
R. LANZAFAME, MESSINA M (2003). Influenza dei
calori specifici sull’implementazione delle equazioni del rilascio termico lordo
nei MCI. In: 58° Congresso Nazionale ATI 2003. Padova – San Martino di
Castrozza, p. 1109-1120
R. LANZAFAME, MESSINA M (2002).
Experimental Data Extrapolation by using V order Logarithmic Polynomials. In:
ASME paper n. 2002-ICE-458. Rockford, Illinois, USA, April 14 – 17, 2002,
vol. ICE Vol. No. 38, p. 147-153
View at Publisher
R.
LANZAFAME, MESSINA M (2001). Fuels Characterization for Use in Internal Combustion
Engines. In: 2001 Fall Technical Conference of the ASME Internal Combustion
Engine Division. Chicago, Illinois, USA, September 23 – 26, 2001, vol. ICE Vol.
No. 37-2, p. 137-145
S. BRUSCA, R. LANZAFAME, MESSINA M (2001). Un
nuovo modello matematico per il calcolo del rilascio termico nei MCI. In: 56°
Congresso Nazionale ATI. Napoli, 10 - 14 Settembre 2001, p. 107-118
R.
LANZAFAME, MESSINA M (2001). V order Logarithmic
Polynomials for Thermodynamic Calculations in ICE. In: Progress in SI and
Diesel Engine Modeling. vol. SAE paper 2001-01-1912, p. 61-70, ISBN:
0-7680-0789-5
View at Publisher
R. LANZAFAME, MESSINA M (2000). A New
Method for the Calculation of Gases Enthalpy. In: Intersociety Energy
Conversion Engineering Conference. vol. 1, p. 318-328, ISBN: 1-56347-375-5
View at Publisher
|